agency file numbers: ul listing: guide # jdyx, file e75865. csa certification: class 1422-01, file lr65063. ul recognized: guide # jdyx2, file e75865. product symbol: c515 physical fuse size: 5 x 15mm limits for pre-arcing time/ul listed fuses. 135% 200% amp ratings max min max 125ma - 7a 60 min. 3 sec. 2 min. limits for pre-arcing time/ul recognized fuses. 350ma 600ma 2a 6a amp ratings min max max max 350ma 240 min. 90 sec. 2 sec. 500 millisec. mechanical characteristics: materials: endcaps are silver-plated brass; leads are tin- plated copper and tube is glass. optional sleeve is flexible fluoropolymer (ul flammability rating vw-1). the tube will self extinguish within one minute. 25% maximum flag burn per astm flammability test astm d2671 procedure c. lead pull: leads will withstand a seven pound pull applied axially to the lead for five seconds. lead bend: leads will be bent 90 degrees in one direction, back to original direction, then 90 degrees in the opposite direction and return to the cycle. leads will withstand two cycles. the bending is to be done with a two pound weight attached to the end of the lead. temp. range: -55? to +85? with proper derating. weight: 1000 = 1.33kg. time-delay axial leaded 5mm x 15mm glass fuses form no. c515 page 1 of 2 bif doc #2006 bussmann 12-17-98 sb98107 rev. a 0.6mm dia. (typ.) 33.5 1.5mm 15.0 0.5mm 33.5 1.5mm 5.0mm (typ.) 5.2 0.3mm dimensions are in millimeters (mm) markings: manufacturer? symbol, product symbol, voltage, ampere, testing agency mark (optional) packaging & ordering information: product ampere symbol rating blank - standard 125ma s - transparent 250ma sleeve for 350ma package code sealed fuses. 375ma bk/ bulk package (100 pcs) 500ma tr/ tape & reel (500 pcs) 600ma tr1/ tape & reel (1,000 pcs) 750ma tr2/ tape & reel (1,500 pcs) 1a note: tape & reel packaging 1.25a per eia 296-e (10.2mm component 1.5a pitch and 52.4mm tape-to-tape spacing) 1.6a 2a 2.25a 2.5a 3a 3.5a 4a 5a 7a c515 telecommunication capabilities: ul 1459: telephone equipment fuses successfully opened: 600 volts (ac) 40 amps 600 volts (ac) 7 amps 600 volts (ac) 2.2 amps ul 497: protectors for paired conductor communication circuits fuses successfully passed without opening: 10 x 1000 microsecond waveform ?50 pulses/1 pulse every 8 seconds @ 1000v fuse rating peak current (a) 250ma 12.5 350ma 19.5 375ma 20.0 500ma 28.5 600ma 36.5 750ma 49.0 1a 66.5 1.25a 100.0 ? fuse resistance was not allowed to vary by more than five percent after completion of the test. c515 r dimensional data ce logo denotes compliance with european union low voltage directive (50-1000v ac, 75-1500v dc). refer to bif document #8002 or contact bussmann application engineering at 314-527-1270 for more information.
rated voltage pre-arcing current voltage drop value rating (v)ac air (mv) max. (i 2 t) (a 2 s) typ. 125ma 35a/250v 10ka/125v ac 1200 0.039 250ma p.f. = 0.7 - 0.8 630 0.18 350ma 35a/250v 10ka/125v ac 520 0.9 25a/600v p.f. = 0.7 - 0.8 375ma 490 0.9 500ma 35a/250v ac 410 1.1 600ma 10ka/125v ac 350 2.7 750ma 250v p.f. = 0.7 - 0.8 300 2.7 1a 250 6.4 1.25a 220 7.6 1.5a 200 13 1.6a 100a/250v ac 200 14 2a 10ka/125v ac 200 27 2.25a p.f. = 0.7 - 0.8 200 31 2.5a 190 42 3a 190 94 3.5a 180 94 4a 400a/125v ac 150 145 5a 125v p.f. = 1.0 150 230 7a 140 540 time-delay axial leaded 5mm x 15mm glass fuses form no.c515 page 2 of 2 bif doc #2006 bussmann 12-17-98 sb98107 rev. a the only controlled copy of this bif document is the electronic read-only version located on the bussmann network drive. all ot her copies of this bif document are by definition uncontrolled. this bulletin is intended to clearly present comprehensive product data and provide technical information that will help the end user with design applicatio ns. bussmann reserves the right, without notice, to change design or construction of any products and to discontinue or limit distribution of any products. bussmann also reserves the right to change or update, withou t notice, any technical information contained in this bulletin. once a product has been select- ed, it should be tested by the user in all possible applications. 350ma 250ma 2.5a 3a 750ma 1a 1.25a 500ma 1.5a time in seconds 1 .1 .1 1 10 100 current in amperes .01 100 10 ampere rating time in seconds 1 .1 .1 1 10 100 current in amperes .01 100 10 ampere rating 3.5a 4a 5a 7a time-current characteristic curves?verage melt (full size curves available) time-current characteristic curves?verage melt (full size curves available) u.l. u.r. csa electrical characteristics: c515 r
|
